Ozone Wash™'s tank cleaning process is protected under a filed patent application . Here's exactly what happens during the 8 steps that make up every base clean.
- Pre-Check & Setup: Water is tested across 6 parameters (Turbidity, pH, ORP, Conductivity, TDS, ATP) before anything else happens. This baseline is what "before/after" actually compares against, and a before-photo is sent via the app.
- Drain & Inspect: The tank is emptied safely and its condition, cracks, sediment volume, structural issues, is logged.
- Mechanical Scrub & Rotary Jet: Biofilm and deposits are physically removed from the walls and base. This step matters more than most people realize, scrubbing alone (without disinfection) never fully solves the problem.
- High-Pressure Rinse: Walls and base are flushed clean, clearing everything loosened by the scrub before disinfection begins.
- Sludge Removal: Settled debris is fully extracted, with the disposal route verified.
- Ozone Disinfection: A calibrated ozone cycle treats the tank, this is the core disinfection step, independently lab-verified at 82% average contaminant reduction against IS 10500:2012.
- Post-Treatment Testing: The same 6 parameters are re-tested to confirm the improvement, not just assumed.
- Proof Delivery: A QR-signed hygiene certificate, your EcoScore™, and before/after photos are issued, all visible in the app.
What about UV?
UV Sterilization is available as a separate optional add-on, a second, visible kill step layered on top of the base ozone process for customers who want extra assurance. It is not one of the 8 base steps; it's an upgrade you choose at booking, priced separately by tank size.